Your All-in-One Power Solution for Home Energy Independence
Haicen's integrated ESS Battery Module provides a complete, ready-to-deploy power solution for your residential solar energy system. Built with premium-grade prismatic LiFePO4 cells, this module is engineered for effortless installation and worry-free operation. It comes fully assembled with a built-in Battery Management System (BMS) that ensures unparalleled protection against overcharge, over-discharge, and short circuits. Achieve energy independence with a battery designed for daily cycling and long-term reliability.
Key Features:
Integrated & Plug-and-Play Design:
Simplifies installation, reducing time and cost.
Ultra-Safe LiFePO4 Chemistry:
Excellent thermal stability, eliminating the risk of fire or explosion.
Robust Built-in BMS:
Provides comprehensive protection for voltage, current, and temperature.
Long Service Life:
Supports over 6,000 deep cycles while maintaining over 80% capacity.
High Energy Density:
Compact form factor delivers ample power for household needs.
The LiFePO4 batteries VS Lead-acid batteries:
| Haicen LiFePO4 batteries | VS | Old technology-Lead-acid batteries |
| Stable discharge condition | Low temperature condition | Unstable discharge condition |
| 3,500 times | Cycle life | ＜500 times |
| Around 10 years | Design life | 3 years |
| As little as 3.5 hours | Charging time | Up to 8 hours |
| No memory, opportunity charge | Charge frequency | Must charge after use |
| Multiple built-in protections, high thermal and chemical stability | Safety | Gas inside may cause explosion |
| 85% or more nominal capacity achieved at high working load | Available capacity | Only 30%~50% nominal capacity achieved under high working load |
| Maintenance-free | Maintenance | Regular water-adding and inspection required |
| Pollution-free | Eco-friendly | Lead is a toxic substance, may cause human lead poisoning |
| Extremely low | Energy loss | 15% |
Key Points for Quality Control:
Cell match: More strict cell matching standard, the difference of lnternal resistance is 1mΩ and voltage is 5mV.
Automatic cells welding: Cells are assembled by Automatic welding equipments to ensure the quality reliability and consistency.
100% Cycle test: All battery packs are 100% cycle tested (Fully Discharged→Fully Charged→Fully Discharged→60% Charged) before package and all test reports are stored.
Unique tracking number: All battery packs are lasered an unique number on the case side for quality tracking.
Certifications:
| UL1642 (Cell) | IEC62619 (Cell) | UN38.3 (Cell / Pack) |
| IEC62133 (Cell) | ROHS (Cell) | CE (Pack) |
| UL1973 (Cell / Pack) |
Product advantages:
● Real double protection (comply with UL1973 and IEC62619).
● High Temperature Tolerance.
● Max. 16pcs in Parallel to get Max. 86kwh system.
● Compatible with most Brands inverters.
● Modular, Scalable & Proven Performance.
● Maintenance Free.
HC48106-3U module could be compatible with the inverters as below:
Operating instruction:
● Step 1: learn Interface Instruction:
● Step 2: Installation:
● Step 3: Connection:
● Step 4: Dialing address
Automatic dialing. Manual dialing (optional)
Single machine address setting：0000 0000
Address setting for parallel operation: the definition of dial switch is shown in the table below.
● Step 5: Turn on the switch separately
● With a load/inverter, the energy storage system start to work!
Noted:
Sleep mode:
a：The system will immediately go to Standby mode without load or charger, and RUN LED will flash (1s ON, 1s OFF). After 48h later, the system will automatically go to sleep mode. And then all LEDs in panel will turn off.
b: With the standby state, the system can be forced into sleep mode through pressing the Switch.
Wake mode:
The following operations can wake up the system from sleep mode：
a. Automatically wake up when connect to a charger.
b. Press on the “Switch” key.
Characteristics Curve:
Market Applications:
● Residential Solar Energy Storage Systems
● Home Backup Power Solutions
● Off-Grid and Micro-Grid Living
● Peak Shaving for Households
Customized items:
Bluetooth App design: Help you to design and upload customized App, or supply you our Source code for your design.
Case color: Customized case color is acceptable based on quantity more than 300pcs per batch.
Label design: We can help you to design customized label on the battery.
Carton design: Customized carton is acceptable based on quantity more than 200pcs per batch.
Certificates: 50% discount on certificates cost for first bulk order and 100% reback for future orders.
NDA agreement: NDA agreement is allowed and necessary to protect your benefits.
Ready to Upgrade Your Power?
[➔ Download the Full Specification Sheet (PDF)]
[⮟ Contact Our Experts for a Quote]
| TECH & SPECS | Model | |
| HC48106-3U | ||
| Electrical Specifications | Nominal Voltage | 51.2V |
| Nominal Capacity | 106Ah | |
| Parallel Connection | Max. 16units | |
| Serial Connection | No | |
| BMS | 16S100A | |
| Circuit Protection | Over charge, Over discharge, Over current, Over temp, Short, Balance | |
| Communication | 2xRs485 and 1xCAN, LCD | |
| Cycle Life | 3000times Cycles@100%DODand 6000times @80%DOD | |
| Self Discharge | Less than 3% per month | |
| Charge Efficiency | 100%@0.2C | |
| Discharge Efficiency | 98-100%@1C | |
| Charge Specifications | Charge Voltage | 57.6±0.8V |
| Standard Current | 20A | |
| Fast Current | 50A | |
| TECH & SPECS | Standard Current | 20A |
| Max. Con. Current | 100A | |
| Peak Current | 250A(2s) | |
| Cut-off Voltage | 40V | |
| Mechanical Specifications | Dimensions (mm) | 482x425x133.5mm(3U standard size) |
| Approx Weight(KG] | 40 | |
| Terminal Type | 4*M6 | |
| Case Color/material | Black Metal Case | |
| IP Rating | IP56 | |
| Cell Type | 3.2V106Ah prismatic cell | |
| Temperature Specifications | Charge Temp | 0℃ to 55℃ (32℉to131℉) |
| Discharge Temp | -20℃ to 60℃ (-4℉ to 140℉) | |
| Storage Temp | -20℃ to 45℃ (-4℉ to 113℉) | |
